The new AirHawk II Air Mask is a lightweight, durable, and economical SCBA for many industrial IDLH (immediately dangerous to life or health) applications. This SCBA fits any budget by keeping its lower-cost options while offering many new choices not offered with any other industrial SCBA. MSA’s AirHawk II Air Mask is a pressure-demand apparatus designed to maintain a slight positive air pressure inside the facepiece during inhalation and exhalation. Positive pressure helps to prevent contaminants from seeping in and around the facepiece, even if small breaks in the face-to-facepiece seal should occur.

The AirHawk II Air Mask is built from six major components:
Facepiece:
Ultra Elite Facepiece® or  Advantage 4000® (small, medium, or large) in either Hycar Rubber or silicone rubber. Nosecups are available in two sizes, standard and large.
AirFrame™ Carrier and Harness Assembly:
Large side handles and a central attachment point to pull workers to safety in rescue scenarios. Available in nylon or Kevlar. Shoulder straps feature easy-to-release friction buckles. The harness also provides optional shoulder pads, lumbar pad, and chest strap.
Cylinders:
MSA offers a choice of three low pressure (2216 psig) 30-minute rated cylinders for use with this SCBA. Choose carbon-wrapped, fiberglass hoop-wound, or all aluminum construction cylinders. High pressure (4500 psig) carbon-wrapped cylinders are available in 30-, 45-, or 60-minute versions.
First-Stage Regulator:
The PR-14 Regulator is designed with the fewest number of parts in the industry, with Teflon-coated anodized valve bodies to minimize internal component friction and maximize service life. The PR-14 Regulator has only 14 replaceable parts and can be maintained without special tools.
Mask-Mounted Regulator:
An integrated shut-off prevents cylinder air loss when disconnecting from the facepiece. The FireHawk Regulator has only 22 replaceable parts and can be maintained without special tools.

Product Data Sheet

$2,060.00

Pre-configured Airhawk II with:

-Ultra Elite Hycar Rubber facepiece
-Nylon Harness
-Shoulder Pads
-Lumbar Pad
-2216 PSI Aluminum Cylinder
-Hard shell case

Product Data Sheet

The ProAir® evolution is an innovative high performance industrial breathing apparatus, designed for use by those individuals who require protection from respiratory hazards in the workplace. This NIOSH-certified SCBA offers reliability, low maintenance and comfort - yet is cost effective to own. With available options, the ProAir® can be customized to meet your specific needs, making it a perfect choice for protection in the workplace.

Features:
• Low cost of ownership
• LDV design that eliminates cross contamination if used by multiple workers.
• Lifetime Warranty.
• State of the art pneumatics.
• Ergonomic harness and backplate assembly.
• Lightweight carbon composite backplate.
• Fail-safe first stage pressure reducer.
• Three sizes in one Panorama Nova mask maintains over 90% of peripheral vision
• Panorama Nova EPDM facepiece
• Direct cylinder connection to 1st stage reducer (no exposed high pressure hoses)
• Hard shell case

Pre-configured ProAir Evolution with:

-Panorama Nova EPDM facepiece
-Ergonomic harness
-Carbon composite backplate.
-2216 PSI Aluminum Cylinder
-Hard shell case 

MSA Walkaway Mounting Bracket

The spring clips permit the wearer to strap on the apparatus unassisted. By stepping forward, the wearer snaps out of the bracket.

$234.68

MSA Wall Mounted Case

Corrosion-resistant, tough, plastic case has a leak proof synthetic rubber bulb seal gasket, which protects breathing apparatus from sunlight, weather, dust and corrosive atmospheres.  Available in 1 or 2 SCBA sizes.

Single Case: $418.20

Double Case:
$683.40

MSA Spectacle Kits

For use by workers who must wear corrective lenses, the spectacle kit ( eyeglass kit ) can be easily inserted into the facepiece. The kit includes a wire support, rubber guide and pair of metal-frame spectacles. Desired adjustment is obtained by moving the spectacle in and out of the rubber guide and up and down the wire support. Corrective lenses are obtained from local sources. Ultravue/Ultra-Twin and Advantage 1000 kits use an S-7 shape, 44 mm lens size with universal bridge. Ultra-Elite kits use an S-7 shape, 48 mm lens size with universal bridge. There are two styles of spectacle kits available for the Ultra Elite facepiece, one using a side wire support to hold the lenses in the facepiece, and another using a center support to position the frames.

Product Data Sheet

$79.41 each